I then opened it up to see what I had created. You might want to cut out several to get one you really like.Now, this is sort of the tricky part. You are going to iron the freezer paper onto the white felt. You place the freezer paper shiny side down and using a medium hot iron with NO steam begin to iron from the middle and work your way out smoothing down the paper as you go. Leave the iron on the paper only about 5 seconds. You dont want to scorch the paper or the felt. Now cut around the outside edge of the freezer paper. At this point, if you want to use wonder under or a fusible applique material, you should use it now fusing it to the felt on the opposite side as the freezer paper, following manufacturer's instructions. Leave the freezer in place while you do this.
Next I cut away the felt on the inside where it was showing through the paper. This is a bit tedious but if you have a pair of sharp pointy scissors it makes it really easy. I have a pair of Fiskars that I believe are called micro point. They are available at most craft and sewing stores for about $10. Well worth the investment...I use them for tons of stuff.
Using white embroidery floss, stitch around each opening. Now, I know this sounds tedious, but I rather enjoy hand stitching and it really didn't take me very long. Another option if you do not want to do all that stitching is to use Wonder Under or your favorite fusible applique material. You could also glue it, but I was afraid both of these applications would leave the fabric feeling stiff.
Lastly I trimmed around the edges with my sharp pointy scissors and then for fun used a scalloped pinking shears to finish it off. Another idea I had was to cut snowflakes about 4 inches across and make coasters. What a great gift idea to lift those mid-winter blahs!